Khairunnisa
Fakultas Teknik, Universitas Mulawarman Jalan Sambaliung, Samarinda Kalimantan Timur, Indonesia
Rahmahtriananda Faradilla
Fakultas Teknik, Universitas Mulawarman Jalan Sambaliung, Samarinda Kalimantan Timur, Indonesia
Ahmad Moh. Nur
Fakultas Teknik, Universitas Mulawarman Jalan Sambaliung, Samarinda Kalimantan Timur, Indonesia
DOI: https://doi.org/10.19184/bst.v13i3.53700
ABSTRACT
Heavy metal Pb(II) contamination in industrial wastewater requires effective and environmentally friendly remediation technologies. This research aims to evaluate biosorbent performance for Pb(II) removal through kinetic and adsorption isotherm analysis. Biosorption studies were conducted with variations in contact time and initial concentration to determine optimal conditions and adsorption mechanisms. The results showed that the biosorbent exhibited a maximum adsorption capacity of 48 mg/g at 100 mg/L concentration, with equilibrium time achieved at 120 minutes, followed by fluctuations before reaching dynamic equilibrium. Kinetic data followed the pseudo-second-order model (R² = 0.9861) with a rate constant k2 = 0.3495 g/mg•min, indicating a chemisorption mechanism. The adsorption isotherm fitted the Langmuir model (R² = 0.9491), demonstrating monolayer adsorption on a homogeneous surface. At low concentrations (0-75 mg/L), the adsorption increase proceeded linearly, whereas at high concentrations (100-200 mg/L), active site saturation occurred. The developed biosorbent demonstrates promising application potential for sustainable and cost-effective industrial wastewater treatment technology for heavy metal Pb(II) removal.
Keywords: Pseudomonas putida, Biosorption, Adsorption kinetics, Isotherms, Immobilization, Heavy metals.