BERKALA SAINSTEK

Comparative Study of Air and Immersion Cooling in Data Centers: Energy Efficiency, PUE, and Carbon Emissions in Indonesia
(Kajian Komparatif Sistem Pendinginan Udara dan Immersion Cooling pada Data Center: Efisiensi Energi, PUE, dan Emisi Karbon di Indonesia)

Desy Agung

Mechanical Engineering Program, Engineering Faculty, Universitas Esa Unggul, Jakarta, Indonesia

SA Pratiwi

Mechanical Engineering Program, Engineering Faculty, Universitas Esa Unggul, Jakarta, Indonesia, Mechanical Engineering Department, Engineering Faculty, Universitas Indonesia, Kampus UI Depok, Indonesia

Rezayanti Novia Putrika Dewi

Industrial Engineering Program, Engineering Faculty, Universitas Esa Unggul, Jakarta, Indonesia

Adinda Rahmah Shalihah

Automotive Engineering Technology, Polytechnic STMI Jakarta, Indonesia

DOI: https://doi.org/10.19184/bst.v14i3.60072

ABSTRACT

The rapid expansion of digital infrastructure has substantially increased data center energy consumption, with cooling systems representing a major contributor to overall facility energy demand. Conventional air-cooling systems face increasing thermal management challenges as computing densities rise, particularly in Artificial Intelligence (AI) and High-Performance Computing (HPC) applications. This study evaluates the potential of immersion cooling as an energy-efficient technology for data centers by comparing its energy performance and carbon emission implications with conventional air cooling. A comparative analytical approach was employed using thermodynamic principles, energy performance indicators, standard operational benchmarks, and data derived from relevant literature. The assessment was conducted using a modeled data center with a 100 kW IT load; therefore, the reported energy and carbon reduction values represent model-based estimates rather than measurements from an operational or experimental data center. The model estimates that immersion cooling can reduce Power Usage Effectiveness (PUE) from 1.80 to 1.20, corresponding to a 33.3% reduction in total facility power consumption. Based on the modeled operating conditions, this reduction is estimated to yield annual energy savings of approximately 525,600 kWh. Using an Indonesian national grid emission factor of 0.85 kg CO₂/kWh, the corresponding avoided Scope 2 emissions are estimated at approximately 446.76 metric tons of CO₂ annually. Furthermore, literature-based evidence indicates that direct contact between dielectric cooling fluid and electronic components can enhance heat removal and support higher rack power densities of approximately 40–100 kW per rack, which is relevant to AI and HPC applications. Overall, the model-based results indicate that immersion cooling has the potential to improve data center energy efficiency and reduce electricity-related carbon emissions, while supporting the transition toward more sustainable and energy-efficient digital infrastructure in Indonesia.

Keywords: Immersion cooling; green industry; data center; energy efficiency; carbon emission.

PDF

Published

13-10-2026

Issue

Vol. 14 No. 3 2026: BERKALA SAINSTEK

Pages

193-205

License

Page updated

Report abuse